- Deterrent Surveillance
- Integral Multi-Protocol (Coaxitron®, RS-422 D and P) Receiver/Driver
- Digital Position and Zoom Control and Feedback Via D Protocol
- Integral Camera Enclosure
- Variable Speed 0.1~100°/Second
- 360° Continuous Pan Rotation
- Quick and Easy Installation
- +33° to -83° Tilt Range
- Operational in 90 mph Winds, Can Withstand Wind Velocity Up to 130 mph
- Pan Preset Speed of 100° Per Second in 50 mph Winds and 50° Per Second in 90 mph Winds
- Meets NEMA Type 4X and IP66 Standards – Pan/Tilt and Enclosure
- Variable Scan Speeds (1-40°/Second)
- Translator Boards for Selected Competitive Protocols
- Easy to Install – Quick and Simple Electrical Connections
- 24VAC or 120/230VAC Selectable
- Designed for Minimal Maintenance, No Gears to Adjust
- Full Continuous-Duty Warranty
SOFTWARE / HARDWARE
- 64 Progammable Presets with Labels
- Auto, Frame and Random Scan
- Programmable Power-up Mode
- Programmable Park
- Programmable Manual Limit Stops (Pan)
- Programmable Scan Limit Stops (Pan)
- Patterns
- Proportional Pan/Tilt
- Eight Zones (programmable in size) Can Be Labeled with Up to 20 Characters Each
- Up to Eight Zones (programmable in size) Can Be Set to Output Blank Video
- 10-Inch Integrated Enclosure with Pre-Assembled, IOP Camera
- Sun Shroud, Heater/Window Defroster and Insulation All Standard
- One Auxiliary Output
- Integrated Window Wiper with Programmable Delay and Shut-Off (ES31C Models)
- Auto Focus with Manual Override
- Auto Iris with Manual Override
- Programmable Settings
- AC Line Lock
SPECIFICATION
MODEL
ES 31CBW24-5W-X
Input Voltage
24, 120, or 230VAC, 50/60Hz, switch selectable for 120/230VAC inputs
Input Voltage Range
±10%
Power Consumption
Maximum 70VA per system
Heater And Defroster
Thermostatically controlled
Electrical Connections
Two power source connections made at mount location with wire splices and one ground wire splice, one BNC receptacle and four wire splices at mount location for RS-422 D and P protocols, two wire splices for open collector auxiliary output
Aux 2
Open collector output with 2-second activation, connected relay must require no more than 32VDC and 40mA to energize relay coil, wire length between Esprit and relay must be less than 30m
Video Coaxial Cable
Max. Wiring Distances Cable Type & Maximum Distance:
RG59/U: 229m
RG6/U: 305m
RG11/U: 457m
Minimum cable requirements: 75 ohms impedance, all-copper center conductor, all copper braided shield with 95% braid coverage
Pan Movement
360° Continuous pan rotation
Vertical Tilt
Unobstructed +33° to -83°
Variable Pan/Tilt Speed
Pan 0.1° to 40°/sec variable-speed operation, 100°/sec Turbo, Tilt 0.1° to 20°/sec variable-speed operation
Preset Speeds
Pan 100°/sec, Tilt 30°/sec
Camera Mounting
Integrated camera sled assembly
Latches
One link-lock, No. 3 stainless-steel latch, can be secured with padlock (not supplied)
Signal Format
PAL
Scanning System
2:1 Interlace
Image Sensor Effective pixels
1/4-inch CCD 724(H) x 582(V)
Horizontal Resolution
>520 TV lines
Lens
F:1.2 (f = 3.8~91.2mm optical)
Zoom
24x optical, 10x digital
Zoom Speed (Optical Range)
3.9 seconds
Horizontal Angle Of View Focus
50.7° at 3.8mm wide zoom, 2.3° at 91.2mm telephoto zoom Automatic with manual override
Maximum Sensitivity
0.005 lux at 1/2 sec shutter (color)
0.015 lux at 1/60 sec shutter (B-W)
0.0005 lux at 1/2 sec shutter (B-W)
0.005 lux at 1/1.5 sec shutter (color)
0.015 lux at 1/50 sec shutter (B-W)
0.0005 lux at 1/1.5 sec shutter (B-W)
Sync. System
Internal/AC line lock, phase adjustable via remote control, V-Sync
White Balance
Automatic with manual override
Shutter Speed
Automatic (electronic iris)/Manual 1/1.5~1/30.000
Iris Control
Automatic Iris Control with manual override
Gain Control
Automatic/OFF
Video Output
1 Vpp, 75 ohms
Video Signal To Noise
>50dB
Customer Reviews:
There are yet no reviews for this product. Please log in to write a review.
+ Camere Video 
