Model
|
IME319-1S
|
CAMERA
|
Imaging Device
|
1/3-inch
|
Imager Type
|
CMOS
|
Imager Readout
|
Progressive scan
|
Highest Resolution
|
3 MPx -- 2048 x 1536 -- 4:3
|
Signal-to-Noise Ratio
|
> 60dB
|
Electronic Shutter Range
|
1 ~ 1/77.000 sec
|
True Wide Dynamic Range
|
Up to 100dB
|
White Balance Range
|
2.000° to 10.000°K
|
Sensitivity
|
F/1.2; 2.850°K; SNR > 20dB
|
Day / Night Capabilities
|
Yes
|
Mechanical IR Cut Filter
|
Yes, (ON / OFF / AUTO selectable), with
different set points on lux
|
AUDIO
|
Streaming
|
Bidirectional: full or half duplex
|
Input / Output
|
Line level / external microphone input; 600-ohm differential, 1Vp-p max. signal level; built-in microphone
|
Compression
|
G.711 PCM 8 bit, 8KHz mono at 64Kbit/s
|
VIDEO
|
Video Streams
|
Multiple simultaneous streams with up to 2 different configurations plus service stream; the secondary stream is variable based on the setup of the primary stream
|
Frame Rate
|
Up to 25, 15, 12.5, 10, 5, 1 (depending on the coding, resolution, and stream configuration)
|
Video Encoding
|
H.264 High, Main, or Base profiles; and MJPEG
|
Bit Rate Control
|
Constrained variable bit rate (CVBR), constant bit rate (CBR), and variable bit rate (VBR) with target range
|
Service Stream
|
JPEG stream; the aspect ratio will be consistent with the independent streams
|
LENS
|
Lens Type
|
Built-in; varifocal
|
Focal Length
|
f/1.2, 3 ~ 9mm
|
Focus
|
Autofocus, motorized
|
Zoom
|
Remote
|
Auto Iris Type
|
DC drive P-iris lens
|
NETWORK
|
Supported Protocols
|
TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, IPv6, SNMP v2c/v3, QoS, HTTP, HTTPS, LDAP (client), SSH, SSL, SMTP, FTP, ARP, ICMP, and 802.1x (EAP)
|
Users
|
Unicast
|
Up to 20 simultaneous users depending on the resolution settings
|
Multicast
|
Unlimited users H.264
|
Security Access
|
Password protected
|
Software Interface
|
Web browser view and setup
|
ELECTRICAL
|
Network Port
|
RJ-45 connector for 100dBase-TX, Auto MDI/MDI-X
|
Accessory Port
|
Micro B USB connector for Pelco accessories
|
Cable Type
|
Cat5 or better for 100dBase-TX
|
Input Power
|
PoE (IEEE 802.3af, Class 3)
|
Power Consumption
|
8.5 W nominal
|
Current Consumption
|
350 mA maximum
|
Local Storage
|
Micro SD
|
Alarm
|
Unsupervised
|
Detects open or closed alarm state
|
Supervised
|
Detects open and short alarm state with external 1-Kohm resistor
|
Input
|
3.5VDC maximum, 3.5mA maximum
|
Relay Output
|
± 32VDC maximum, 150mA maximum
|
MECHANICAL
|
Dome Attenuation
|
Clear
|
f/0.0 light loss
|
Smoked
|
f/1.0 light loss
|
Pan/Tilt Adjustment
|
Manual, Pan: 355°; Tilt: 180°; Rotation: 360°
|
ENVIRONMENTAL
|
Operating Temperature
|
-10° C to +50°C
|
Cold Start
|
-10°C
|
Operating Humidity
|
20 to 80%, RH noncondensing
|
PHYSICAL
|
Weight
|
1.0Kg
|
Product Box Dimensions (approximate)
|
22.2(D) x 32.9(W) x 17.6(H) cm
|
CERTIFICATIONS / RATINGS / PATENTS
|
• CE, Class A
• FCC, Class A
• UL/cUL Listed
• KCC
• CCC
• C-Tick
• S-Mark
• Meets NEMA Type 4X, IP66 rating (Environmental), and IP56 (Vandal-Resistant)
• Compliant with applicable immunity sections of EN 50155, EN 50121-3-2, and EN 50121-4
• Cisco® Medianet Media Services Proxy 2.0 compatible
• ONVIF Profile S Conformant
• MTBF ≥ 200.000 POH (Reporting standard is RELEX Modeling)
|