FEATURE
-The wireless PIR motion detector can be used to provide an extra margin of safety. Without the need for wires, it can be placed where ever it is not practical to install door / window sensors on every opening
-A motion sensor detects movement within a specific area by sensing the infrared energy emitted from a body as it moves across the sensor field of view. When this motion is detected, the sensor transmits an alarm signal to the control panel
-Compatible with NX-408-I-E, NX-416-I-E and NX-448-I-E receivers
-10.6m by 12m coverage area for standard and optional animal alley lenses
-Masking kit provided to block portions of the coverage areas
-Special walk test mode after tamper activation (60 sec.)
-Tamper switch (opening/removal)
-Optional pet lens NX-485
-Supervisory signal transmitted every 64 minutes to the control panel
-Sensor low battery reports (trouble) to the control panel
-Three minute transmitter lockout time after an alarm that helps extend battery life
SPECIFICATION
MODEL
|
NX-880-I
|
Power Source (alkaline batteries)
|
DC 2 x 1.5V
|
Battery Life (typical)
|
2 ~ 4 years
|
Transmit Range (open air)
|
150m
|
Range PIR
|
11 x 12m
|
Sensitivity Setting
|
2 levels (standard/high)
|
Transmission Frequency
|
868MHz
|
Power Safe Features
|
Transmitter Lock Out Time
|
3 minutes after an alarm
|
Special Walk Test Mode
|
60 sec. (after tamper activation)
|
Tamper Switch
|
detection of opening and removal
|
Operating Temperature
|
0°C ~ +50°C
|
Dimensions (L x W x H)
|
73 x 62 x 59mm
|
Weight (including batteries)
|
0.128Kg
|
Colour Housing
|
Off-white
|